02cc not moving

Discussion in 'Scanmaster G for Syclone/Typhoon (gauge style)' started by Potlicker, Jul 5, 2019.

  1. Potlicker

    Potlicker Member

    my o2 cc count is not moving and i may be wrong but didn’t the convert used to show unlocked. It only shows locked now and blank when it’s not.
  2. EricM

    EricM Administrator Staff Member

    If you are using a Velosyty chip, "CC" is is closed loop wide correction, not O2 counts. So it should be at 128 most of the time. It will go up or down at WOT, if using wideband correction.

    The converter lockup readout is correct, blank when unlocked.

Share This Page